Rosemount Smart Wireless Gateway Spécifications télécharger pdf (Page 7)

Quick Start Guide

May 2015

Note

Only one port and one mode of operation (PD or PSE) can be selected at a time; any other

combination of jumpers is invalid.

Note

IEEE 802.3af-2003 PoE standard provides up to 15.4 W of DC power (minimum 44 V DC and 350

mA) to each device. Only 12.95 W is assured to be available at the powered device as some power

is dissipated in the cable.

IEEE 802.3at-2009 PoE standard also known as “PoE+” or “PoE plus”, provides up to 25.5 W of

power. The 2009 standard prohibits a powered device from using all four pairs for power.

For more information on PoE and frequently asked questions, reference

document number 00870-0500-4420.

Establishing a connection

Note

For information on connecting a Windows 7 PC, see the technical note (document number

00840-0900-4420).

1. Connect the PC/laptop to the Ethernet 1 (Primary) receptacle on the Gateway.

Figure 4. Gateway PC/Laptop Connection Illustration

A. PC/laptop

B. Ethernet 1 receptacle

2. To establish the PC/laptop settings, navigate to Start>Settings>Network

Connections.

a. Select Local Area Connection.

b. Right click to select Properties.

Do not connect to the Ethernet 2 with power (covered) port. This port supplies power and

could damage the PC/laptop.

+ +

-A B

S S

24 V DC24 V DC

Power InputPower Input

ModbusModbus

Not UsedNot Used

CaseCase

POEPOE

P2P2 P1P1

00825-0200-4420_RevFD.fm Page 7 Thursday, May 7, 2015 8:26 AM

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Pas de commentaire

Rosemount Smart Wireless Gateway Spécifications Page 7