Product Data Sheet
00813-0200-4420, Rev AA
January 2009
Smart Wireless Gateway
6
Product Certifications
Approved Manufacturing Locations
Rosemount Inc. – Chanhassen, Minnesota, USA
Emerson Process Management GmbH & Co. - Karlstein, Germany
Emerson Process Management Asia Pacific Private Limited -
Singapore
Beijing Rosemount Far East Instrument Co., Limited - Beijing,
China
Telecommunication Compliance
All wireless devices require certification to ensure that they adhere
to regulations regarding the use of the RF spectrum. Nearly every
country requires this type of product certification. Emerson is
working with governmental agencies around the world to supply
fully compliant products and remove the risk of violating country
directives or laws governing wireless device usage.
FCC and IC
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following conditions. This device may not cause
harmful interference. This device must accept any interference
received, including interference that may cause undesired
operation. This device must be installed to ensure a minimum
antenna separation distance of 20 cm from all persons.
Ordinary Location Certification for FM
As standard, the Gateway has been examined and tested to
determine that the design meets basic electrical, mechanical, and
fire protection requirements by FM, a nationally recognized testing
laboratory (NRTL) as accredited by the Federal Occupational
Safety and Health Administration (OSHA).
North American Certifications
N5 FM Division 2, Non-Incendive
Certificate Number: 3028321
Nonincendive for Class I, Division 2, Groups A, B, C, and D.
Dust Ignition-proof for Class II, III, Division 1,
Groups E, F, and G; Indoors/outdoor locations;
NEMA Type 4X
Temperature Code: T4 (-40 °C < T
a
< 60 °C)
Canadian Standards Association (CSA)
N6 CSA Division 2, Non-Incendive
Certificate Number: 1849337
Suitable for Class I, Division 2, Groups A, B, C, and D.
Dust Ignition-proof for Class II, Groups E, F, and G;
Suitable for Class III Hazardous Locations.;
Install per Rosemount drawing 01420-1011.
Temperature Code: T4 (-40 °C < T
a
< 60 °C)
CSA Enclosure Type 4X
European Union Directive Information
The EC declaration of conformity for all applicable European
directives for this product can be found on the Rosemount website
at www.rosemount.com. A hard copy may be obtained by
contacting your local sales representative.
ATEX Directive (94/9/EC)
Emerson Process Management complies with the ATEX
Directive.
Electro Magnetic Compatibility (EMC) (2004/108/EC)
Emerson Process Management complies with the EMC
Directive.
Radio and Telecommunications Terminal Equipment
Directive (R&TTE)(1999/5/EC)
Emerson Process Management complies with the R&TTE
Directive
European Certification
N1 ATEX Type n
See note below
Certificate Number: Baseefa 07ATEX0056X
ATEX Marking: Ex II 3 G
EEx nA Nl IIC T4 (-40 °C < T
a
< 60 °C)
ND ATEX Dust Ignition-proof
Certificate Number: Baseefa 07ATEX0057
EX tD A 22 IP66 T135 (-40 °C < T
a
< 60 °C)
EEx nA nL IIC T4 T4 (-40 °C < T
a
< 60 °C) II 3D
Vmax = 28V
N7 IECEx Type n
See note below
Certificate Number: IECEx BAS 08.0012X
Ex nC IIC T4 (-40 °C =< T
a
<=60 °C)
Rated Voltage: 28V
NF IECEx Dust Ignition-proof
Certification Number: IECEx BAS 07.0013
Ex tD A22 IP66 T135 (-40 °C < T
a
< 60 °C)
V
max
= 28V
Conditions of Installing N1 and N7:
The Apparatus is not capable of withstanding the 500V insulation
test required by Clause 9.4 of EN 60079-15: 2005. This must be
taken into account when installing the apparatus.
Combinations of Certifcations
KD Combination of N5, N6, and N1.
(86 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels