Rosemount Smart Wireless Gateway Spécifications Page 73

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 86
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 72
65
Reference Manual
00809-0200-4420, Rev HB
Appendix C: DeltaV Ready
January 2015
Figure C-2. Decommissioned Nodes Folder within DeltaV Explorer
Commission the Gateway using the following procedure:
1. Select START>PROGRAMS>DELTAV>ENGINEERING> DELTAV EXPLORE to launch the
DeltaV Explorer application.
2. Expand the folder SYSTEM CONFIGURATION >PHYSICAL
NETWORK>DECOMMISSIONED NODES.
3. Right click on the Smart Wireless Gateway and select Commission.
4. Enter a name for the Gateway and select OK.
5. Select YES when prompted to Auto-Sense Wireless Gateway.
At this time the Reconcile I/O window will appear. The purpose of this screen is to assign
WirelessHART devices to DeltaV I/O channel. This allows the wireless device to be referenced in
other DeltaV applications like Control Studio.
Figure C-3. Assign WirelessHART Devices to DeltaV I/O Channel
New Wireless Gateway
Vue de la page 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 85 86

Commentaires sur ces manuels

Pas de commentaire